Inductive sensor NJ8-18GK-SN-50M
- 8 mm non-flush
- Degree of protection IP68
- ATEX-/IECEx-approvals for zone 0/1/20/21 (Ex i)
- ATEX-/IECEx-approvals for zone 2/22 (Ex ec/tc)
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Uddrag af datablad: Tekniske data for NJ8-18GK-SN-50M
| General specifications | ||
|---|---|---|
| Switching function | Normally closed (NC) | |
| Output type | NAMUR with safety function | |
| Rated operating distance | 8 mm | |
| Installation | non-flush | |
| Assured operating distance | 0 ... 6.48 mm | |
| Reduction factor rAl | 0.4 | |
| Reduction factor rCu | 0.3 | |
| Reduction factor r304 | 0.85 | |
| Output type | 2-wire | |
| Nominal ratings | ||
| Nominal voltage | 8.2 V (Ri approx. 1 kΩ) | |
| Switching frequency | 0 ... 200 Hz | |
| Current consumption | ||
| Measuring plate not detected | ≥ 3 mA | |
| Measuring plate detected | ≤ 1 mA | |
| Functional safety related parameters | ||
| MTTFd | 11850 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| NAMUR | EN 60947-5-6:2000 IEC 60947-5-6:1999 |
|
| Standards | EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012 |
|
| Approvals and certificates | ||
| IECEx approval | ||
| Equipment protection level Ga | IECEx PTB 11.0092X | |
| Equipment protection level Gb | IECEx PTB 11.0092X | |
| Equipment protection level Gc (ec) | IECEx TUR 21.0017X | |
| Equipment protection level Da | IECEx PTB 11.0092X | |
| Equipment protection level Dc (tc) | IECEx TUR 21.0018X | |
| Equipment protection level Mb | IECEx PTB 11.0092X | |
| ATEX approval | ||
| Equipment protection level Ga | PTB 00 ATEX 2049 X | |
| Equipment protection level Gb | PTB 00 ATEX 2049 X | |
| Equipment protection level Gc (ec) | TÜV 20 ATEX 8523 X | |
| Equipment protection level Da | PTB 00 ATEX 2049 X | |
| Equipment protection level Dc (tc) | TÜV 20 ATEX 8524 X | |
| UL approval | cULus Listed, General Purpose | |
| Ordinary Location | E87056 | |
| Hazardous Location | E501628 | |
| Control drawing | 116-0454 | |
| CCC approval | ||
| Hazardous Location | 2020322315002308 | |
| NEPSI approval | ||
| NEPSI certificate | GYJ16.1392X | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 100 °C (-40 ... 212 °F) | |
| Mechanical specifications | ||
| Connection type | cable | |
| Housing material | Crastin (PBT), black | |
| Sensing face | Crastin (PBT), black | |
| Degree of protection | IP68 | |
| Cable | ||
| Wire end ferrules | yes | |
| Cable diameter | 6 mm ± 0.2 mm | |
| Bending radius | > 10 x cable diameter | |
| Material | silicone | |
| Core cross section | 0.75 mm2 | |
| Length | 50 m | |
| Dimensions | ||
| Length | 39 mm | |
| Diameter | 18 mm | |
| General information | ||
| Use in the hazardous area | see instruction manuals | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27274101 |
| ECLASS 12.0 | 27274101 |
| ECLASS 11.0 | 27272401 |
| ECLASS 10.0.1 | 27272401 |
| ECLASS 9.0 | 27272401 |
| ECLASS 8.0 | 27272401 |
| ECLASS 5.1 | 27272401 |
| ETIM 9.0 | EC002714 |
| ETIM 8.0 | EC002714 |
| ETIM 7.0 | EC002714 |
| ETIM 6.0 | EC002714 |
| ETIM 5.0 | EC002714 |
| UNSPSC 12.1 | 39121550 |
Details: NJ8-18GK-SN-50M
Datasheet: NJ8-18GK-SN-50M
| Datasheet | Fil type | Fil størrelse |
|---|---|---|
| Datasheet NJ8-18GK-SN-50M | 745 KB | |
| Datasheet NJ8-18GK-SN-50M | 725 KB | |
| Fiche de données NJ8-18GK-SN-50M | 728 KB | |
| Datenblatt NJ8-18GK-SN-50M | 724 KB | |
| Scheda tecnica NJ8-18GK-SN-50M | 729 KB | |
| Datasheet NJ8-18GK-SN-50M | 775 KB | |
| Folha de dados NJ8-18GK-SN-50M | 727 KB | |
| Hoja de datos NJ8-18GK-SN-50M | 731 KB | |
| Datasheet NJ8-18GK-SN-50M | 733 KB |
Documents: NJ8-18GK-SN-50M
| Instruction manuals | Fil type | Fil størrelse |
|---|---|---|
| Инструкции | 207 KB | |
| Návod k poużití | 197 KB | |
| Instruktions manual | 195 KB | |
| Instruction manual | 197 KB | |
| Kasutusjuhend | 189 KB | |
| Käyttöohje | 189 KB | |
| Manuel d'instructions | 202 KB | |
| Betriebsanleitung | 196 KB | |
| Οδηγίες χρήσης | 211 KB | |
| Handleiding | 197 KB | |
| Instruction manual / Betriebsanleitung | 194 KB | |
| Használati útmutató | 201 KB | |
| Manuale di istruzioni | 199 KB | |
| Lietošanas pamācība | 196 KB | |
| Instrukciju vadovas | 197 KB | |
| Instrukcja obsługi | 260 KB | |
| Manual de instruções | 201 KB | |
| Manual de utilizare | 201 KB | |
| Návod na poużitie | 198 KB | |
| Navodila za uporabo | 194 KB | |
| Manual de instrucciones | 202 KB | |
| Manual | 193 KB |
Approvals+Certificates: NJ8-18GK-SN-50M
| Certificates | Fil type | Fil størrelse |
|---|---|---|
| Canada USA UL Hazardous Location | 412 KB | |
| Canada USA UL Ordinary Location | 1806 KB | |
| China SITIIAS CCC Ex Certificate | 2727 KB | |
| EU PTB ATEX ia 2G, 1G, 1D s. certificate | 9560 KB | |
| Europe TUV Rheinland ATEX ec 3G | 678 KB | |
| Europe TUV Rheinland ATEX tc 3D | 862 KB | |
| United Kingdom CML UKEX Category I M2 UKEX Category II 2 G UKEX Category II 1 D UKEX Category II 1 G | 331 KB | |
| Worldwide PTB IECEx ia | LINK | --- |
| Worldwide TUV Rheinland IECEx ec | LINK | --- |
| Worldwide TUV Rheinland IECEx tc | LINK | --- |
| Control Drawings | ||
| Control drawing UL / Control drawing UL | 206 KB | |
| Declaration of Conformity | ||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 1339 KB | |
| UK Declaration of Conformity (P+F) | 1323 KB |
Tilhørende produkter: NJ8-18GK-SN-50M
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here!
The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.
The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!
As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.
Pepperl+Fuchs A/S
Kirkebjerg Allé 90
DK-2605 Brøndby
Denmark
info@dk.pepperl-fuchs.com
+45 7010 4210
Pepperl+Fuchs er markedsledende indenfor udvikling og fabrikation af elektroniske sensorer og komponenter til det globale automatiseringsmarked. Kontinuerlig innovation, kombineret med høj kvalitet og stabil vækst har sikret uafbrudt succes gennem mere end 70 år. Pepperl+Fuchs har 6.300 ansatte på verdensplan og har produktionsfaciliteter i Tyskland, USA, Singapore, Ungarn, Indonesien og Vietnam; de fleste ISO 9001 certificerede.